Mt Victoria is one of the city's oldest suburbs, and its houses are mainly 19th-century wooden villas and cottages, with some bungalows and apartment blocks among them. Most are one to two and a half storeys, with painted weatherboard walls, corrugated iron roofs, shallow front yards, minimal side yards and little on-site parking. Much of the housing was renovated from the 1970s, and many houses show repeated alterations and additions. A new gas hob, a flued heater, gas hot water or a barbecue point on the deck all need a licensed gasfitter and a certificate at the end.
Gas in Mt Victoria: layered renovations on the ridges and in the hollows
Mt Victoria is one of Wellington's oldest suburbs, and most of its villas and cottages have been renovated more than once since the 1970s. For gas work, that history is the first thing we look at. A kitchen may have moved from one end of the house to the other, a gas fire may have been swapped for a heat pump, and the pipe from each change can still be under the floor. We trace the existing pipework from the meter outward, pressure test it and decide what can be reused before quoting anything new.
Where a house sits changes the job too. On the ridges, homes are taller and narrower and set further back, so the run from a street meter to an upstairs kitchen or a top floor heater can be long and largely vertical. In the hollows around Brougham Street and Austin Street, homes sit lower and closer to the road, with shorter runs but cramped subfloors. Minimal side yards on both mean bottles and new meter positions must fit within the clearance rules from windows and doors, which is tricky on a narrow lot.
Parts of the suburb fall in the Mt Victoria North Townscape Precinct, so a flue or bottle station on the front of a house may need a planning check. Most homes here are close to the central city mains that Powerco upgraded by 2021, so a natural gas connection is worth checking before you settle on bottles.
Local tip: On a narrow Mt Victoria lot, decide where the gas will come in before planning a kitchen move, as the clearance rules can rule out some spots.
Gas Fitter in Mt Victoria: Local Factors
Older villas and bungalows often still have capped or forgotten gas lines from heaters and ranges that were removed long ago. We trace and make safe any redundant pipe and run new gas line under the floor so original features stay untouched.
For anything else, see our plumbers in Mt Victoria.
How We Handle Gas Fitter in Mt Victoria
When the job is done you get the certification required for gas work in New Zealand. Keep it with your house papers, because insurers and future buyers in Mt Victoria may ask to see it.
Pricing: quotes are free, and every job gets a fixed price before we start, so there are no surprises on the invoice.
Gas Fitter Jobs We Do in Mt Victoria
- Gas certificate of compliance
- Outdoor gas bayonet
- Gas oven connection
- New natural gas connection
- Install gas hot water
Gas Fitter Mt Victoria FAQs
Can old gas pipe in my Mt Victoria villa be reused for a new cooktop?
Sometimes. If it passes a pressure test and is big enough for the new load it can stay, but pipe from several renovations is often undersized or has old joints, and then we replace it.
How do I check a gasfitter is licensed?
Search the public register kept by the Plumbers, Gasfitters and Drainlayers Board using the gasfitter's name or licence number.
Can you put in an outdoor gas point for a barbecue in Mt Victoria?
Yes. We can fit a bayonet point or fixed connection outside for a barbecue, patio heater or outdoor kitchen.
Gas Fitter Near Mt Victoria
- Gas Fitter Te Aro
- Gas Fitter Hataitai
- Gas Fitter Newtown
- Gas Fitter Kilbirnie
- Gas Fitting across Wellington
